Konfiguration

Alle Parameter
?
Neustart
RS2 Disclaimer

WARNING:

Please note that you are enabling this device to turn on or off electrical outlet(s) on RS2 unit(s).

Also note that the acceptance of these terms is saved in the XML configuration file on this device. If this file is used to configure another unit, then the acceptance of these conditions will carry over to that device as well.

There are no warranties, express or implied by this action, by the operation of law or otherwise, of enabling this feature. GEIST DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANTABILITY, SATISFACTION, AND FITNESS FOR A PARTICULAR PURPOSE.

Geist express warranties will not be enlarged, diminished, or affected by and no obligation or liability will arise out of Geist rendering of technical or other advice or service in connection with the alarms being set on the RS2.

The foregoing warranties and remedies are exclusive and in lieu of all other warranties and remedies. THERE ARE NO WARRANTIES SET FORTH ABOVE--ONLY THE EXCLUSION OF ALL IMPLIED WARRANTIES.

Geist warranties extend only to purchaser and are not extended to any third parties. IN NO EVENT SHALL GEIST, ITS OFFICERS, DIRECTORS, AFFILIATES OR EMPLOYEES BE LIABLE FOR ANY FORM OF INDIRECT, SPECIAL, CONSEQUENTIAL OR PUNITIVE DAMAGES, ARISING OUT OF THE USE, SERVICE OR INSTALLATION, OF THE PRODUCTS, WHETHER SUCH DAMAGES ARISE IN CONTRACT OR TORT, IRRESPECTIVE OF FAULT, NEGLIGENCE OR STRICT LIABILITY OR WHETHER GEIST HAS BEEN ADVISED IN ADVANCE OF THE POSSIBILITY OF SUCH DAMAGES. SPECIFICALLY, GEIST IS NOT LIABLE FOR ANY COSTS, SUCH AS LOST OF PROFITS OR REVENUE, LOSS OF EQUIPMENT, LOSS OF USE OF EQUIPMENT, LOSS OF SOFTWARE, LOST OF DATA, COST OF SUBSTITUENTS, CLAIMS BY THIRD PARTIES, OR OTHERWISE.

No salesman, employee or agent of Geist is authorized to add or vary the terms of this warranty. Warranty terms may be modified if at all, only in writing signed by a Geist officer and legal department.

View the Geist Warranty at: geistglobal.com/geistmfg_files/firmware/GeistMfgWarranty.txt

Disabled

I Accept

 

Systemuhr eingestellt auf MGZ?
Uhrenmodus einstellen:
GMT zu Ortszeit, (+/-)hh:mm
Monat
Tag
Jahr
(JJ)
Stunde
(0-23)
Minute
(0-59)
Sekunde
(0-59)
NTP Primary Server

17.253.84.125
NTP Secondary Server

129.6.15.28
Mit dem NTP-Server synchronisieren (Sekunden)
Sommerzeit?
Sommer/Winterzeit AUSGESCHALTET
Sommer/Winterzeit aktivieren:
DST Start:
in
bei
Sommer/Winterzeit Ende:
in
bei
Name/Passwort-Konfiguration
ANMERKUNG 1: Hat das Konto momentan ein Passwort, wird an den Kontoeinstellungen nichts geändert, wenn das Feld "Altes Passwort" leer gelassen wirdlllllllllsslls.
ANMERKUNG 2: Das Administrator-Passwort kann im Feld "Altes Passwort" jedes Kontos verwendet werden.
ANMERKUNG 3: Wenn Sie "Neues Passwort" auf leer setzen, muss "Benutzername" auch leer sein.
ANMERKUNG 4: Wenn "Neues Passwort" nicht leer ist, darf "Benutzername" auch nicht leer sein.
Administrator-Benutzername?
Altes Passwort
Neues Passwort
Neues Passwort wiederholen
(noch einmal, zur Bestätigung)
Achtung: Notieren Sie Ihr Passwort gut. Ein Passwort zu ersetzen kann bis zu 48 Stunden dauern.
Kontroll-Benutzername?
Altes Passwort
Neues Passwort
Neues Passwort wiederholen
(noch einmal, zur Bestätigung)
Achtung: Notieren Sie Ihr Passwort gut. Ein Passwort zu ersetzen kann bis zu 48 Stunden dauern.
Nur Benutzername anzeigen?
Altes Passwort
Neues Passwort
Neues Passwort wiederholen
(noch einmal, zur Bestätigung)
Achtung: Notieren Sie Ihr Passwort gut. Ein Passwort zu ersetzen kann bis zu 48 Stunden dauern.
Admin-Info?
Kontakt-Name:
Kontakt-Email:
(sysContact)
Kontakt-Telefonnummer:
Gerätestandort:
(sysLocation)
Gerätebeschreibung:
(sysName)
Konfigurations-XML-Datei gespeichert?
SSL-Zertifikat und persönlicher SSL-Schlüssel?
Das SSL-Zertifikat und der persönliche SSL-Schlüssel sind UNGÜLTIG
Datei mit SSL-Zertifikat:
Datei mit Persönlichem SSL-Schlüssel:
Hochladen der System-Firmware?
Datei Firmwarepaket:

Das Hochladen der Firmware kann ein paar Minuten dauern. Bitte warten Sie auf die Antort des Browsers.